Mylar Camouflage Stencils 10mil DIY Paint Hunting Rifle gun RC Camo 8 PACK Set

Acid Tactical® Camouflage Stencil Set (Spray Through)
HEXTAC / Swarm Camo / ICETAC / Multicam
Torn Camo / Warped Digital / Tiger Stripe / Woodland

You get 1 of each design. 8 Total Designs

Camouflage stencils to paint metal, plastic, wood surfaces and parts. This stencil set is made of 10Mil Mylar Sheet. These are spray through stencils. The black parts in our images are completely removed.

They are flexible and are the thickness of about 4 sheets of printer paper. These designs can wrap around smaller items such as rifles, pistols, etc. For larger projects you can make a frame for the design. (See Below)

Acid Tactical stencils can be used with Airbrush, Can aerosol paints, Oils, & Water based paints.

Great for Cars, Trucks, Jon Boats, Duck Blinds, Tree Stands, ATV's, Guns, Models, RC Trucks, and more.

What you get.

8 - 9x14" stencils, one of each design as pictured in our main image.

Specifications:

Material: Mylar
Thickness: 10 Mil (Approximate thickness of 4 sheets of printer paper)
Length: 14"
Width: 9"

STENCILING TIPS:

1. Base coat your project with a good camouflage color or use multiple similar color paints. (3 different tones of tan, or 3 different tones of green)

2. Use light coats of paint rather than thick coats and spray directly at the stencil rather than at angles.

3. For larger projects, create a frame for the stencil by using poster board. Cut a rectangle in the center of the poster board slightly smaller than the stencil. Approx. 8.5" x 13.5". Then cover the cutout with the stencil and attach using masking tape. This will stop overspray.

4. Practice before taking on your real project.